got today 2 tasks with errors


http://www.gpugrid.net/result.php?resultid=11080227

95-NOELIA_TRP188-0-1-RND5224_3

Stderr Ausgabe
<core_client_version>7.2.42</core_client_version>
<![CDATA[
<message>
(unknown error) - exit code -98 (0xffffff9e)
</message>
<stderr_txt>
# GPU [GeForce GTX 760] Platform [Windows] Rev [3301M] VERSION [60]
# SWAN Device 0 :
# Name : GeForce GTX 760
# ECC : Disabled
# Global mem : 2048MB
# Capability : 3.0
# PCI ID : 0000:01:00.0
# Device clock : 1071MHz
# Memory clock : 3004MHz
# Memory width : 256bit
# Driver version : r337_00 : 33788
ERROR: file mdioload.cpp line 162: No CHARMM parameter file specified
10:42:52 (4752): called boinc_finish

</stderr_txt>
]]>

______________________________________________________________________________

http://www.gpugrid.net/result.php?resultid=11080200

26-NOELIA_TRP215-1-4-RND9753_0

Stderr Ausgabe
<core_client_version>7.2.42</core_client_version>
<![CDATA[
<message>
(unknown error) - exit code -98 (0xffffff9e)
</message>
<stderr_txt>
# GPU [GeForce GTX 760] Platform [Windows] Rev [3301M] VERSION [60]
# SWAN Device 0 :
# Name : GeForce GTX 760
# ECC : Disabled
# Global mem : 2048MB
# Capability : 3.0
# PCI ID : 0000:01:00.0
# Device clock : 1071MHz
# Memory clock : 3004MHz
# Memory width : 256bit
# Driver version : r337_00 : 33788
ERROR: file mdioload.cpp line 162: No CHARMM parameter file specified
10:44:56 (6264): called boinc_finish

</stderr_txt>
]]>[url][/url]

Likewise the new Noelia_Trp fail instantly on my gtx 750 ti (Win XP x86) with the same error having received three so far. Good to know its not just my machine / maxwell issue.

ERROR: file mdioload.cpp line 162: No CHARMM parameter file specified
01:51:38 (3128): called boinc_finish

Currently all of the NOELIA_TRP WU's I have received (four so far) have failed within a few seconds also. All give the same error:

Exit status -98 (0xffffffffffffff9e) Unknown error number
ERROR: file mdioload.cpp line 162: No CHARMM parameter file specified
02:07:23 (11844): called boinc_finish

Machine (149863) - GTX680
WinXP Driver 335.28 v8.41 (cuda60)
http://www.gpugrid.net/result.php?resultid=11078372
http://www.gpugrid.net/result.php?resultid=11077061

Machine (158717) - GTX680
WinXP Driver 335.28 v8.41 (cuda60)
http://www.gpugrid.net/result.php?resultid=11078799

Machine (165832) - GTX780Ti
Win7 Driver 331.82 v8.41 (cuda42)
http://www.gpugrid.net/result.php?resultid=11070971

Guess its an error in the program. I had one too, but all wing(wo)men too.
Just after a few seconds, so no worries. W'll have to wait until Noelia made a change.

---

Greetings from TJ

Same here - instant fail. It looks like this WU finally went through after the sixth send-out, however.

http://www.gpugrid.net/workunit.php?wuid=8215418

...and another

http://www.gpugrid.net/workunit.php?wuid=8215374

This problem seems to have been repeated with today's batch of NOELIA_SH2 tasks on the short queue.

Many errors on host 45218

Instant work unit NOELIA_SH2 failure throughout today- (Exit status -98 (0xffffffffffffff9e) Unknown error number ERROR: file mdioload.cpp line 162: No CHARMM parameter file specified)

Majority of wingman host(s) failed NOELIA_SH2- prompting (too many errors may be bug) message. All presently requested units on my host show many wingman failures beforehand.

Instant failure no matter beginning part of NOELIA_SH2 work unit name-for example... argphex1,asvalx7,et al.

Hello all,

I'm new to GPUGRID.net (obviously) but I've been using my NVidia card on other projects. From what I've been reading here the NOELIA wu's have been failing at a fairly substantial rate for some crunchers. I have also been having the same difficulties with the NOELIA units; they all instantly fail with the exit code -98, ERROR: file mdioload.cpp line 162: No CHARMM parameter file specified. I'm currently using a NVidia GTX650 Ti Boost with the latest driver (337) from NVidia trying to crunch the short workunits for now. I'm currently 0 for 5 on GPU tasks. I just thought I would post it here since this appears to be the correct thread for this issue. Hopefully the project administrators can correct the issue so I can get back to crunching!

Thank you all for your time. Happy crunching!

I've noticed that with these WUs where I have a failure, all the wingman that fail are running Windows as I am. When I see WU with 5 failures and a success, the success is always on a Linux system. The failures are on Windows systems. Has anybody else seen this pattern?

After a long run without problems, I encountered these failures yesterday. :(

11116386 8236608 158482 6 Jun 2014 | 0:36:38 UTC 6 Jun 2014 | 0:43:02 UTC Error while computing 3.03 0.14 --- Short runs (2-3 hours on fastest card) v8.41 (cuda60)
11114622 8236718 158482 6 Jun 2014 | 0:36:38 UTC 6 Jun 2014 | 0:43:02 UTC Error while computing 4.40 0.16 --- Short runs (2-3 hours on fastest card) v8.41 (cuda60)
11110452 8236955 158482 6 Jun 2014 | 0:39:13 UTC 6 Jun 2014 | 0:43:02 UTC Error while computing 0.12 0.12 --- Short runs (2-3 hours on fastest card) v8.41 (cuda60)
11110140 8236969 158482 6 Jun 2014 | 0:39:13 UTC 6 Jun 2014 | 0:43:02 UTC Error while computing 3.34 0.14 --- Short runs (2-3 hours on fastest card) v8.41 (cuda60)

Hey guys,

We're looking into it. Unfortunately Noelia is away right now so we may have to cancel them for now. Thanks for catching it and pointing it out.

Nate

I've noticed that with these WUs where I have a failure, all the wingman that fail are running Windows as I am. When I see WU with 5 failures and a success, the success is always on a Linux system. The failures are on Windows systems. Has anybody else seen this pattern?

I just completed 3 Noelia short tasks on an Ubuntu 14.04 rig and they have validated. On two of the tasks, there were several previous failures on Windows boxes.

Hello !

Have you stopped the short WU's upload ?

Same problem for me last night, 19 short NOELIA WU's in error after a few seconds.

Thank You

Kind Regards

Phil1966

Work unit argargx8-NOELIA_SH2eq-0-1-RND4849 failed on a mix of Win7 and Linux hosts.

---

Hello all.

The NOELIA_SH2eq workunits were all failing, so those have been cancelled.

There some other groups that follow the naming pattern NOELIA_TRPXXX. Those continue to run, because from what I can tell the ones that are being sent out now do not have a problem. The first post in this thread (http://www.gpugrid.net/forum_thread.php?id=3770&nowrap=true#36977) refers to a group that was cancelled, fixed and resent earlier in the week. However, if you continue to have problems with those please let me know here.

Nate

Hello all.

The NOELIA_SH2eq workunits were all failing, so those have been cancelled.

There some other groups that follow the naming pattern NOELIA_TRPXXX. Those continue to run, because from what I can tell the ones that are being sent out now do not have a problem. The first post in this thread (http://www.gpugrid.net/forum_thread.php?id=3770&nowrap=true#36977) refers to a group that was cancelled, fixed and resent earlier in the week. However, if you continue to have problems with those please let me know here.

Nate

Hello: Six (6) Units - NOELIA_SH2eq-0-1-RND2630_3 - downloaded a few minutes (13 H local) makes all failed in Windows 8.1.

In Linux Ubuntu 14.04 the same type of short work units operate without problem.

Unfortunately, I'll have to wait for my daily quota to allow another fetch before I can test.

Hello: Six (6) Units - NOELIA_SH2eq-0-1-RND2630_3 - downloaded a few minutes (13 H local) makes all failed in Windows 8.1.

In Linux Ubuntu 14.04 the same type of short work units operate without problem.

Hello: Short tasks - NOELIA_SH2eq-0-1-RND2630_3 - still fail in Windows

I am getting the same error today when I started the first task on my GTX 750 Ti:
lystrpx8-NOELIA_SH2eq-0-1-RND2046_1
Workunit 8238384
Created 7 Jun 2014 | 14:50:16 UTC
Sent 7 Jun 2014 | 16:19:10 UTC
Received 7 Jun 2014 | 16:26:05 UTC
Server state Over
Outcome Computation error
Client state Compute error
Exit status -98 (0xffffffffffffff9e) Unknown error number
Computer ID 170120
Report deadline 12 Jun 2014 | 16:19:10 UTC
Run time 2.00
CPU time 0.14
Validate state Invalid
Credit 0.00
Application version Short runs (2-3 hours on fastest card) v8.41 (cuda60)


Stderr output
<core_client_version>7.3.19</core_client_version>
<![CDATA[
<message>
(unknown error) - exit code -98 (0xffffff9e)
</message>
<stderr_txt>
# GPU [GeForce GTX 750 Ti] Platform [Windows] Rev [3301M] VERSION [60]
# SWAN Device 0 :
# Name : GeForce GTX 750 Ti
# ECC : Disabled
# Global mem : 2048MB
# Capability : 5.0
# PCI ID : 0000:01:00.0
# Device clock : 1137MHz
# Memory clock : 2700MHz
# Memory width : 128bit
# Driver version : r337_00 : 33788
ERROR: file mdioload.cpp line 162: No CHARMM parameter file specified
12:27:22 (4164): called boinc_finish

</stderr_txt>
]]>



Looks like my buddy on this had a different error:

http://www.gpugrid.net/workunit.php?wuid=8238384

---

Proud Founder and member of



Have a look at my WebCam