Hello: I are failing all tasks 4.2 CUDA now also the CUDA 3.1...?

UBUNTU 12.04 GTX 295

"<core_client_version>7.0.28</core_client_version>
<![CDATA[
<message>
process exited with code 98 (0x62, -158)
</message>
<stderr_txt>
# Using device 0
# There are 2 devices supporting CUDA
# Device 0: "GeForce GTX 295"
# Clock rate: 1.24 GHz
# Total amount of global memory: 939327488 bytes
# Number of multiprocessors: 30
# Number of cores: 240
# Device 1: "GeForce GTX 295"
# Clock rate: 1.24 GHz
# Total amount of global memory: 939196416 bytes
# Number of multiprocessors: 30
# Number of cores: 240
ERROR: Failed to parse input file
11:59:55 (16677): called boinc_finish

</stderr_txt>
]]> "

I am in a similar situation.

I added a 550TI to my machine and set fans to maintain temps of <=72.

Tasks started failing with "failed to parse input file".

Had it no been for Carlesa25's post, I would have attributed it to the addition of the second card but perhaps this is not the problem??

Ken

After many failures, CUDA 3.1 and 4.2 CUDA have entered two CUDA 3.1 tasks that are running well... we'll see if it lasts.

Is proving very confusing and irritating the theme of several CUDAs

I noticed that you are running Ubunutu 12.04, any chance that you updated to the 302.17 NVidia driver? I all ready posted about this in a few other threads, but I was experiencing similar issues and reverting to 295.59 allowed me to continue crunching.

I noticed that you are running Ubunutu 12.04, any chance that you updated to the 302.17 NVidia driver? I all ready posted about this in a few other threads, but I was experiencing similar issues and reverting to 295.59 allowed me to continue crunching.

Hello: Thanks for the comment, I'm using 295.59 yesterday worked perfectly with CUDA 3.1 (CUDA 4.2 always fails)now seems returns to work.

I also started getting failures on Boinc 6.10.17 Ubuntu 10.04 with nividia driver 302.17 on 2 GTX550ti computers , the first few work units after the driver update went thru ok then a lot of failures most cuda 4.2 but some 3.1 as well, both computers suspended for now.

A 3rd one a GTS450 running Ubuntu 10.04 with 302.17 has been receiving all cuda 3.1 and is still running ok.

Is anybody having success with Ubuntu and 302.17 with cuda 4.2?
Jim

Based on what I've read on the forums here, a few people seem to be running CUDA 4.2 ok with 302.17 but more often than not people are having issues. Myself, I had to downgrade to 295.59 to avoid getting "output file not found" errors. We should probably make a separate thread about it or something. The most interesting part is that people seem to be getting a large variety of different errors, but each machine only outputs one specific error every time.