hi there just add the project to fill my gpu's because seti@home is down

and this happend

Incorrect function. (0x1) - exit code 1 (0x1)

all of them except one i try different clocks some at the STOCK and same happened. I use these clock to crunch Folding Seti@home and Einstein and no problem at all

is this a driver related problem ? i use 260.99 driver

except the errors forgot to write that my win 7 x64 has crash with acemd2_6.15_windows_intelx86__cuda31

and Blue Screen 2 times ...

You will probably stop receiving new tasks as you have had too many failures.
You were changing the frequency a lot during the runs. Best to work at stock if you try again. Make sure you are cooling the GPU enough - keep the fans up a bit. You could also try dropping the RAM frequency a bit.
1 task did complete, so perhaps you were using the system a lot when the crashes occurred? I would suggest you restart you system to begin with. A more recent driver might help. While I cant recommend a specific driver for your card I would suggest you try 266.58 to begin with.
Make sure the screen saver and Aero are off. You might also want to free up a CPU core and see if that helps.

my cards are water cooled so no problem with the heat constant temp of 50 C so not a problem

i will try with the 266,58 yes i'm using it when crunching. but it just freeze and blue screen with the application acemd2_6.15_windows_intelx86__cuda31 3 task errors then application collapse then Blue Scren 2 times ??? don't understand when crunching folding it is 100% usage of the gpu's no problem at all i was adjusting the OC by the folding@home seti and Einstein crunching and evga soft and msi afterburn so no problem with the overclock settings using them 24h/7days and yes i was stop 1 core to do the job
it is more intresting that it gives errors with the STOCK CLOCK ??? this is not gpu failure it is software problem with the drivers or other software kind related problem
will try with the newest drivers but i thing will be the same. yes i stop reciving new units before make some changes but i do not know what to change when my system is 100% stable i will try with the 266.58 drivers will see what will be with them

i got some progress leave the PCI from 101mhz to 100 and no problem except one core of one of the gtx 295 constantly running errors :(
it is very strange in Einstein and seti and folding no problem at all but in gpu grid has problem with the one of the cores of the first gtx 295

i see that a lot of people complaining about one core don't fold or work properly when crunching folding or gpu some says it is ok with win xp but i can't use quad sli in win xp so it is not an option because i use it for games too.

some says it is a hardware failure RMA card but it crunch other project without an issue so it must be some software problem ?