All acemd3 tasks are defective

Message boards : Number crunching : All acemd3 tasks are defective

Author	Message
Magiceye04 Send message Joined: 1 Apr 09 Posts: 24 Credit: 67,905,687 RAC: 0 Level Scientific publications	Message 59637 - Posted: 21 Dec 2022 \| 19:26:08 UTC
	Not only for me, all users before also got these defective WUs. Could please someone stop sending out this waste?
	ID: 59637 \| Rating: 0 \| rate: / Reply Quote

Pop Piasa Send message Joined: 8 Aug 19 Posts: 252 Credit: 458,054,251 RAC: 0 Level Scientific publications	Message 59648 - Posted: 24 Dec 2022 \| 1:41:24 UTC - in response to Message 59637. Last modified: 24 Dec 2022 \| 2:30:24 UTC
	Could please someone stop sending out this waste? May I humbly submit... If Adria learns from this setback it is not a waste, it becomes a step that had to be taken to move on. This is how research is conducted. Trial and error. It is not being presented for our entertainment as competitors, so it carries the caveat that experiments sometimes fail. (I hope that wasn't put too bluntly, I think I maybe was channeling Karl Popper there.) 😉 ____________ "Together we crunch To check out a hunch And wish all our credit Could just buy us lunch" Piasa Tribe - Illini Nation
	ID: 59648 \| Rating: 0 \| rate: / Reply Quote

Magiceye04 Send message Joined: 1 Apr 09 Posts: 24 Credit: 67,905,687 RAC: 0 Level Scientific publications	Message 59661 - Posted: 27 Dec 2022 \| 12:00:51 UTC
	Of course an experiment can go wrong. But as I requested - then the experiment shall be stopped. In best case the experiment is pre-tested as beta-version with just a few WUs before it starts for all users.
	ID: 59661 \| Rating: 0 \| rate: / Reply Quote

Keith Myers Send message Joined: 13 Dec 17 Posts: 1341 Credit: 7,671,980,095 RAC: 13,342,645 Level Scientific publications	Message 60888 - Posted: 14 Dec 2023 \| 22:35:23 UTC
	How many other Linux users are having difficulty running this sparse release of acemd3 tasks? I haven't been successful on any of my Linux hosts. Looking at the other wingmen that are offered the tasks, I see similar failures from other Linux wingmen. And usually the task is finally completed by a Windows host. They seem to have no issues with the tasks. I've never had any issues with the acemd3 task in the past. And I have no issues with the ATMbeta tasks when they are offered.
	ID: 60888 \| Rating: 0 \| rate: / Reply Quote

ServicEnginIC Send message Joined: 24 Sep 10 Posts: 581 Credit: 9,797,362,024 RAC: 21,283,588 Level Scientific publications	Message 60889 - Posted: 15 Dec 2023 \| 5:46:21 UTC - in response to Message 60888.
	Exactly the same here on my Linux hosts for current ACEMD 3 tasks. They all fail after a few seconds, with no clue about the reason. Stderr output <core_client_version>7.20.5</core_client_version> <![CDATA[ <message> process exited with code 195 (0xc3, -61)</message> <stderr_txt> 04:36:04 (51194): wrapper (7.7.26016): starting 04:36:21 (51194): wrapper (7.7.26016): starting 04:36:21 (51194): wrapper: running bin/acemd3 (--boinc --device 0) 04:36:22 (51194): bin/acemd3 exited; CPU time 0.000000 04:36:22 (51194): app exit status: 0x1 04:36:22 (51194): called boinc_finish(195) And eventually, the same WU succeeds when a new task arrives a Windows host. I've reset GPUGRID project at BOINC Manager, and no variation. No problem witn ATMbeta tasks on the same hosts.
	ID: 60889 \| Rating: 0 \| rate: / Reply Quote

Bedrich Hajek Send message Joined: 28 Mar 09 Posts: 485 Credit: 11,105,310,123 RAC: 15,486,491 Level Scientific publications	Message 60890 - Posted: 15 Dec 2023 \| 6:35:24 UTC - in response to Message 60889.
	Exactly the same here on my Linux hosts for current ACEMD 3 tasks. They all fail after a few seconds, with no clue about the reason. Stderr output <core_client_version>7.20.5</core_client_version> <![CDATA[ <message> process exited with code 195 (0xc3, -61)</message> <stderr_txt> 04:36:04 (51194): wrapper (7.7.26016): starting 04:36:21 (51194): wrapper (7.7.26016): starting 04:36:21 (51194): wrapper: running bin/acemd3 (--boinc --device 0) 04:36:22 (51194): bin/acemd3 exited; CPU time 0.000000 04:36:22 (51194): app exit status: 0x1 04:36:22 (51194): called boinc_finish(195) And eventually, the same WU succeeds when a new task arrives a Windows host. I've reset GPUGRID project at BOINC Manager, and no variation. No problem witn ATMbeta tasks on the same hosts. I have seen this before, a few years ago, on few occasions. It happened when the license for the Linux app expired, and the project management forgot to renew it. Sometimes, it was the other way, the Windows license expired, and all the Windows computers would fail and the Linux computers would succeed. If you move the clock on your computer to before the expiration date of the app, before the task starts, the task would succeed, but boinc interface would be "unresponsive"......
	ID: 60890 \| Rating: 0 \| rate: / Reply Quote

Ian&Steve C. Send message Joined: 21 Feb 20 Posts: 1069 Credit: 40,231,533,983 RAC: 432 Level Scientific publications	Message 60891 - Posted: 15 Dec 2023 \| 13:03:34 UTC - in response to Message 60890.
	you're right $ ./acemd3 # # ACEMD version 3.5.1 # # Copyright (C) 2017-2022 Acellera (www.acellera.com) # # When publishing, please cite: # ACEMD: Accelerating Biomolecular Dynamics in the Microsecond Time Scale # M. J. Harvey, G. Giupponi and G. De Fabritiis, # J Chem. Theory. Comput. 2009 5(6), pp1632-1639 # DOI: 10.1021/ct9000685 # # Arguments: # input: input # platform: # device: # ncpus: # precision: mixed # # Licence: # Check floating licence: # ACELLERA_LICENCE_SERVER -- not defined # ACELLERA_LICENSE_SERVER -- not defined # Check node-locked licence: # ACELLERA_LICENCE_FILE -- not defined # ACELLERA_LICENSE_FILE -- not defined # /opt/acellera/licence.dat -- DENIED (Unable to locate target file) # /opt/acellera/license.dat -- DENIED (Unable to locate target file) # /home/ian/.acellera/licence.dat -- DENIED (Unable to locate target file) # /home/ian/.acellera/license.dat -- DENIED (Unable to locate target file) # # This version of ACEMD has expired! # You should update to the latest version. # If you want to continue using this version, you need a licence. ____________
	ID: 60891 \| Rating: 0 \| rate: / Reply Quote

Keith Myers Send message Joined: 13 Dec 17 Posts: 1341 Credit: 7,671,980,095 RAC: 13,342,645 Level Scientific publications	Message 60892 - Posted: 15 Dec 2023 \| 20:01:03 UTC
	Gianni replied that they are on it for the fix.
	ID: 60892 \| Rating: 0 \| rate: / Reply Quote

Erich56 Send message Joined: 1 Jan 15 Posts: 1132 Credit: 10,248,232,676 RAC: 28,883,222 Level Scientific publications	Message 60893 - Posted: 16 Dec 2023 \| 8:12:52 UTC - in response to Message 60890.
	I have seen this before, a few years ago, on few occasions. It happened when the license for the Linux app expired, and the project management forgot to renew it. Sometimes, it was the other way, the Windows license expired, and all the Windows computers would fail and the Linux computers would succeed. this has happened several times in the past. The team found out about the expiration of a license only after tasks started failing. I never understood what's the problem with making a note in a calendar some time before the expiration date of a license, so that the license could be renewed in time.
	ID: 60893 \| Rating: 0 \| rate: / Reply Quote

Post to thread

Message boards : Number crunching : All acemd3 tasks are defective

	About	Science	Volunteers	Performance	Forum	Join us	Donate