So far so good. Been running about an hour now.

Added to 1 host, Windows XP, NVIDIA 169.21 cuda 1.1 drivers.

Reports 1 GPU correctly and resumed work.
8/23/2008 4:43:45 PM||OS: Microsoft Windows XP: Professional x86 Editon, Service Pack 2, (05.01.2600.00)
8/23/2008 4:43:46 PM||CUDA devices found
8/23/2008 4:43:46 PM||Coprocessor: GeForce 8800 GT (1)
8/23/2008 4:43:46 PM||Version change (6.3.9 -> 6.3.10)
8/23/2008 4:44:18 PM|PS3GRID|Restarting task Pm28726-GPUTEST2-1-10-acemd_3 using acemd version 630


The bug for communication with BOINCview is fixed changeset 15920. 6.3.10 clients now remain shown as active. Tested with two versions of BV 1.5.b8 and 1.2.6.

I will test on other hosts on Monday.
____________
Alpha Tester ~~ BOINCin since 10-Apr-2004 (2.28) ~~~ Join team USA

23/08/2008 23:49:52||Starting BOINC client version 6.3.10 for windows_x86_64
23/08/2008 23:49:52||Coprocessor: GeForce 9600 GT (1)
23/08/2008 23:49:52||Version change (6.2.18 -> 6.3.10)

Run fine here too on a vista64, I'm wainting for the new application based on CUDA2.0 to restart the gpu computing; I'm impatient

It run fine on XP x64 for me, detects the cards ok.
CUDA devices found
Coprocessor: GeForce 8800 GT (2)

It's now busy crunching away on Both 8800GT's :)
____________

Down with the Kredit Kops!!!

The bug for communication with BOINCview is fixed changeset 15920. 6.3.10 clients now remain shown as active. Tested with two versions of BV 1.5.b8 and 1.2.6.

I will test on other hosts on Monday.

Looks like I found a minor bug:

When I want to switch between "host total", "host average" etc in the statistics tab, the 6.3.10 BOINC does not refresh the actual content of the window until I minimize/maximize or switch to a different tab and back. Suspending GPU-Grid doesn't solve the problem.

MrS

Same problem here in the 32bit XP and 64bit Vista version. Also the 6.3.10 is a memory pig. After a runtime of one day or a little bit more the BOINC manager needs up to 1 GB RAM while running multiple projects. A restart helps, but this is not the fine method, I prefer systems running without baby sitting.
____________

Same problem here in the 32bit XP and 64bit Vista version. Also the 6.3.10 is a memory pig. After a runtime of one day or a little bit more the BOINC manager needs up to 1 GB RAM while running multiple projects. A restart helps, but this is not the fine method, I prefer systems running without baby sitting.

Just checked again my both Vista 64 bit machines. On the Phenom 9950 BE with the GTX280 the BOINCMGR.EXE use 1,460,524 K, after the restart 5,308 K. On my Phenom 9850 BE with the 8800GT they use 856,912 K, after the restart 4,740 K. On my XP 64 bit machine BOINCMGR.EXE only use 26,408 K.

Looks here like the big problem only exist on Vista 64 bit machines.


____________

Just checked again my both Vista 64 bit machines. On the Phenom 9950 BE with the GTX280 the BOINCMGR.EXE use 1,460,524 K, after the restart 5,308 K. On my Phenom 9850 BE with the 8800GT they use 856,912 K, after the restart 4,740 K. On my XP 64 bit machine BOINCMGR.EXE only use 26,408 K.

Looks here like the big problem only exist on Vista 64 bit machines.

How long does it usually take before it shows such a high memory usage?
I installed Vista x64 +SP1 +updates last night, it's been running for just over 13 hours and boincmgr.exe shows 5,572K, this is on an Intel Q6600 with a 8800GT.

my memory usage for boincmgr.exe has only grown 1 MB in the past 2 days, from 117mb to 118mb. And no, I have not closed it or restarted BOINC or the comp.

Server 2008 x64 with BOINC 6.3.10 x64

The bug for communication with BOINCview is fixed changeset 15920. 6.3.10 clients now remain shown as active. Tested with two versions of BV 1.5.b8 and 1.2.6.

But when you try to update the client, there is an error.
No communication possible for those client!
So there is still a bug.

I'm running two GTX 280's on BOINC 6.3.10 and it says it is only finding one. Anyone have some suggestions to test if the computer is recognizing both cards? I'm pretty new to all this, so, any input is greatly appreciated.

Thanks.

Hello,

To run multiple cards with BOINC, you need to disable SLI, otherwise only one card will be recognized.

To check your cards you can use GPUZ.

Hello,

To run multiple cards with BOINC, you need to disable SLI, otherwise only one card will be recognized.

To check your cards you can use GPUZ.

Hello,

To run multiple cards with BOINC, you need to disable SLI, otherwise only one card will be recognized.

To check your cards you can use GPUZ.

When I run that GPU-Z it says that the SLI is disabled. It does not give me the option to enable it either...?

Sorry, I can't help much further, as I neither have SLI nor Windows...

I think I read somewhere that if you are running Vista, you need a monitor hooked to both cards for vista to detect both. Not sure on this though.

I'm running two GTX 280's on BOINC 6.3.10 and it says it is only finding one. Anyone have some suggestions to test if the computer is recognizing both cards?

I just installed it on my XP64 system. The Projects tab is blank. And that's a problem, because I cannot go to the projects tab, to allow other projects to resume getting work.

Edit: After finally downloading a PS3GRID task and starting to crunch, all the projects on the project tab re-appeared. Go figure.
____________
Reno, NV
Team: SETI.USA

Edit: After finally downloading a PS3GRID task and starting to crunch, all the projects on the project tab re-appeared. Go figure.

Sounds like the refreshing issue discussed earlier.

MrS

finally got it to work on my xp64, grand :)

---
Will

finally got it to work on my xp64, grand :)

I think I read somewhere that if you are running Vista, you need a monitor hooked to both cards for vista to detect both. Not sure on this though.

The bug for communication with BOINCview is fixed changeset 15920. 6.3.10 clients now remain shown as active. Tested with two versions of BV 1.5.b8 and 1.2.6.

But when you try to update the client, there is an error.
No communication possible for those client!
So there is still a bug.

Yes, (as Keith already reported elsewhere) it was finally fixed in changeset 15942. I've successfully tested the both patches on 6.3.8 and BOINCview was extremely happy with such client ;-).

To be expected in BOINC 6.3.11.